Multi-point Soil Moisture Monitoring System for Water Monitoring in Increasing Wheat Yield

Wheat production is a matter of great concern in the process of agricultural planting and development. There are many external factors affecting its yield. The first moisture condition is one of the important factors. In the long-term production process, the status of soil moisture during wheat growth was analyzed, and ways to increase water use efficiency were discussed from the aspect of farmland water regulation. Using multi-point soil moisture monitoring system to monitor soil moisture in wheat field, we can find that the water in the whole growth period mainly depends on the water storage in the soil before the winter, and the difference between the actual water consumption and the water demand is still relatively large, and often suffers from dryness. With early threats, supplemental irrigation is an important measure for the stabilization of yield and yield for the retention of wheat. The implementation of supplementary irrigation measures generally requires the use of a multi-point soil moisture monitoring system to monitor and understand the relevant conditions of soil moisture and make the most suitable irrigation method.

The monitoring of soil moisture using the multi-point soil moisture monitoring system was divided into seven treatments with an estimated amount of 75, 90, 120, 180, 225, and 270 mm. As the amount of irrigation increases, the production yield also increases. However, if the amount of irrigation exceeds a certain amount, the effect of increasing production is not obvious or slightly decreases. From the point of view of the efficiency of water irrigation per millimeter of irrigation, it generally decreases as the amount of irrigation increases. 'But a small amount of irrigation benefits are also low. Under the condition that the upper layer of soil is relatively dry, the depth of water infiltration is shallow, and it is easy to dissipate. With the deeper root system of wheat, the moisture of the supply cannot be fully absorbed by the crop. Therefore, the amount of irrigation is larger, the number of irrigation is relatively less, and the benefits are better. The irrigation time of dryland wheat is better, because the water content of wheat fields has been decreasing. The soil moisture is relatively high in early time, and the moisture can easily penetrate into the deep layer. On the one hand, water loss can be reduced. On the other hand, the deep layer water is more abundant and can be fully Crop absorption.

Through the analysis of monitoring results of soil moisture in wheat fields by multi-point soil moisture monitoring system, it can be found that in the early stage of wheat development, the water conditions are generally better, but the water dispersion is very strong, and it is very necessary to adopt conservation measures. For example, it is very important to cover loose soil. Effective measures. Moreover, using a multi-point soil moisture monitoring system to analyze the combination of soil moisture and yield after irrigation, it can be found that the wheat yield always increases with the increase of irrigation volume, and the early irrigation is more effective than the late irrigation, and the amount of irrigation is large each time. In some cases, the number of irrigations is relatively small, which will increase the moisture in the deep soil and reduce the loss of water.

Waste Plastic Pyrolysis Plant

Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.

Batch Waste Tyre Pyrolysis Plant

Flowchat of Batch Waste Tyre Pyrolysis Plant

Batch Waste Tyre Pyrolysis Plant 

Advantages of Batch Waste Tyre Pyrolysis Plant

 

1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.

2.  Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.

3.  National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.

4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.

5.  Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.

6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.

7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.

8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.

 

Technical Parameter of Batch Waste Tyre Pyrolysis Plant

NO.

ITEM

PROJECT

1

Equipment Model

XY-7

XY-8

2

Door Model

Full Open Door

Full Open Door

3

Suitable Raw Materials

Rubber/Plastic Products

Rubber/Plastic Products

4

Structure

Horizontal Type Revolves

Horizontal Type Revolves

5

Reactor Size

Φ2200*6000mm  Î¦2600*6600mm

Φ2200*6000mm  Î¦2600*6600mm

6

Capacity for One Batch

5-6Mt; 8-10Mt

5-6Mt; 8-10Mt

7

Oil Yield of Tires

40%-45%

40%-45%

8

Work Pressure

Normal Pressure

Normal Pressure

9

Reactor Rotation Speed

0.4R/M

0.4R/M

10

Fuels Choice

Coal, Wood

Coal, Wood, Gas, Oil

11

Power

18KW/H

18-25KW/H

12

Cooling Method

Water Cycling

Water Cycling

13

Type of Drive

External Annular Gear

External Annular Gear

14

Heating Method

Direct

Direct

15

Type of Installation

With Foundation

With Foundation/Integrated Base

16

Noise dB(A)

≦85

≦85

17

Operation Mode

Intermittent Operation

Intermittent Operation

18

Total Weight(MT)

25-40

25-40

19

Installation Space Required

30m*10m

30m*10m

20

Manpower

3~4/batch

3~4/batch

21

  Shipment

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

Ф2200×6000=1*40HC+1*40FR

Ф2600×6600=2*40HC+1*40FR

 

Waste Plastic Pyrolysis Plant

Waste Plastic Pyrolysis Plant,Plastic Pyrolysis Plant,Pyrolysis Of Plastic,Waste Plastic Pyrolysis Oil Plant

Shangqiu Jinpeng Industrial Co., Ltd. , http://www.recyclings.nl