Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve

Model NO.: Dispense Valve-5
Media Temperature: Medium Temperature
Trademark: OEM
Transport Package: According to Customer`S Requirement
Specification: 15*89white
Origin: Guangdong, China (Mainland)
Model NO.: Dispense Valve-5
Media Temperature: Medium Temperature
Trademark: OEM
Transport Package: According to Customer`S Requirement
Specification: 15*89white
Origin: Guangdong, China (Mainland)
Product Name:Suck-back single fluid Glue type pneumatic solenoid dispensing valve (Dispense Valve-5)

Similar Products:(Per drawing)

Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve


EBAY on retail platform, our aim is integrity management, service-oriented.
EBAY:    http://stores.ebay.com/fhi-us2014
a variety of models to choose:
Suction precision dispensing valve
product manual:
Elevating the design of more efficient and timely closing of plastic to prevent Epoxy, drawing objects.

Technical Parameters:
Type 1:
Back suction lift
Operating Air Source / Using gas source
3-7Kgf / cm
Min.Shot Volume / minimum discharge rate
0.01ml
Operation Viscositi / operating viscosity
1-1.000.000cps
Wet Body Material / main material
Aluminum
Material Input Pressure / Feeding pressure
<10kg
Material Inlet Outlet Size / feed inlet size
1/4 "npt (f)
Operating Cycle / operation rate
<600 / min
Overall Dimensions (mm) / Dimensions
(D) 31 × (H) 110
Weight / Weight (g)
220g

Application materials: epoxy, silicone, and other viscosity range of adhesives in 1-1.000.000cps

product manual:

with any of the feed pump or accumulator pressure tank connection.

can be accessed by all kinds of needles out of the mouth.
Technical Parameters:

Type 2:
Top pin
Operating Air Source / Using gas source
3-7Kgf / cm
Min.Shot Volume / minimum discharge rate
0.01ml
Operation Viscositi / operating viscosity
1-1.000.000cps
Wet Body Material / main material
aluminum
Material Input Pressure / Feeding pressure
<300 Kg
Material Inlet Outlet Size / feed inlet size
1/8 "pt (f)
Operating Cycle / operation rate
<600 / min
Overall Dimensions (mm) / Dimensions
(D) 21 (H) 130
Weight / Weight (g)

 Production equipment
Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve

Detection Device
Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve


Certificate
Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve
Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing ValveSuck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve


FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.

2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report,     certificate of material and etc as per your need.

3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.

4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.

5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.

6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
  Product Name:Suck-back single fluid Glue type pneumatic solenoid dispensing valve (Dispense Valve-5)

Similar Products:(Per drawing)

Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve


EBAY on retail platform, our aim is integrity management, service-oriented.
EBAY:    http://stores.ebay.com/fhi-us2014
a variety of models to choose:
Suction precision dispensing valve
product manual:
Elevating the design of more efficient and timely closing of plastic to prevent Epoxy, drawing objects.

Technical Parameters:
Type 1:
Back suction lift
Operating Air Source / Using gas source
3-7Kgf / cm
Min.Shot Volume / minimum discharge rate
0.01ml
Operation Viscositi / operating viscosity
1-1.000.000cps
Wet Body Material / main material
Aluminum
Material Input Pressure / Feeding pressure
<10kg
Material Inlet Outlet Size / feed inlet size
1/4 "npt (f)
Operating Cycle / operation rate
<600 / min
Overall Dimensions (mm) / Dimensions
(D) 31 × (H) 110
Weight / Weight (g)
220g

Application materials: epoxy, silicone, and other viscosity range of adhesives in 1-1.000.000cps

product manual:

with any of the feed pump or accumulator pressure tank connection.

can be accessed by all kinds of needles out of the mouth.
Technical Parameters:

Type 2:
Top pin
Operating Air Source / Using gas source
3-7Kgf / cm
Min.Shot Volume / minimum discharge rate
0.01ml
Operation Viscositi / operating viscosity
1-1.000.000cps
Wet Body Material / main material
aluminum
Material Input Pressure / Feeding pressure
<300 Kg
Material Inlet Outlet Size / feed inlet size
1/8 "pt (f)
Operating Cycle / operation rate
<600 / min
Overall Dimensions (mm) / Dimensions
(D) 21 (H) 130
Weight / Weight (g)

 Production equipment
Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve

Detection Device
Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve


Certificate
Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve
Suck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing ValveSuck-Back Single Fluid Glue Type Pneumatic Solenoid Dispensing Valve


FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.

2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.
---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report,     certificate of material and etc as per your need.

3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.

4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.

5.What is the standard of package?
---Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.

6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
 

Doosan DV11 DV15 series Diesel Engine technology from the German MAN diesel engine, 6-cylinder V-shaped arrangement, power coverage of 340 ~ 440Ps,

 emissions meet the Euro â…¢, Euro â…£ standard, has been widely used in heavy trucks, large passenger cars, cement mixer and other purposes, China has been widely used.

doosan diesel engine parts

DOOSAN Engine Spare Parts

DOOSAN Engine Spare Parts,Doosan Drive Gear,Doosan Cylinder Head,Doosan Crankshaft Gear

Shijiazhuang Houfeng Trading Co.,Ltd , https://www.hfdieselengine.com